R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 07-01-2009 | 01:44 PM
  #7556  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by megasaxon
these are older models, not sure how old, but def early ones, both are the sport versions, had long needles, but i cut them down... B21, silver block, A28 silver block
Ah, ok - If you cut the needles down then they should both be pretty similar.
With the short needle go for 1.5 in on the HSN and 2 - 2.5 in on the LSN. This should get you running for sure, then fine tune from there.
grizz1 is offline