Originally Posted by
Halloween
Maybe your right and is't the speedo but something else.
We rode with the same tyres the VTEC 30R and so with the same rollout 65mm... Better batteries....? I drove with de IP 5000 40C. One of the best...
The transmitter profile is the same as i had with the LRP TC. Make that the difference? Must i resetted it before i used the Ko esc?
How can i limit the end point? On the transmitter ore in the esc?
And what do you mean with the highpoint? I can't find the right translation of that.
The gearing was almost the same but with the hacker i could turn the gearing down. I will try that next week.
In testing the profiles 5 minutes, in practise 10 minutes, in races 5 minutes.
Halewijn
Hey mate, read you instructions that came with the speedo carefully, its specifies " the esc will store your neutral transmitter setting!!!"
May be that your problem
Try that
p.s: High point is value for full trottle on you esc - transmitter depending on your esc setting. You dont get full speed if your high point isn't set to neutral [100%] when you first set your esc. If you highpoint is too low you esc cant show maximum performance.
Thats in my Ko helios manuel...