R/C Tech Forums - View Single Post - Set-up Sheets
Thread: Set-up Sheets
View Single Post
Old 01-21-2002 | 03:58 AM
  #3  
daniz24's Avatar
daniz24
Regional Moderator
 
Joined: Aug 2001
Posts: 3,189
From: D-Square Racing
Default
Tinggal klik quote aja... nih contohnya :

Originally posted by daniz24
Name : Danny
Track and Layout Type : CIS - Surikarn's Style
Car : Yokomo MR-4TCSP

Front
Shock Length : 60.2 mm
Shock Position : Std
Camber Link : Std
Piston : #3
Spring : Yellow
Oil : #300
Roll Bar : Silver 1.2 mm Upper Type
Camber : -1
Castor : Std 3'
Front toe : -1
Ride Height : 5.5 mm
Width : Std

Rear
Shock Length : 60.5 mm
Shock Position : Std
Camber Link : Std
Piston : #3
Spring : Green
Oil : #400
Roll Bar : Silver 1.2 mm
Camber : -1.5
Rear toe : -1
Ride Height : 6 mm
Width : Std
Wheel Base : Short

Tire : Sorex 32 R
Insert : Sorex Type B Medium
Wheel : RJ Ride 6 spokes

Body : Andy's Stratus
Wing : Yokomo 180 mm
Front Drive : Oneway
Center Drive : Oneway
Speed Control : GM V12XC
Motor : Reedy Ti 8x2
Brush : Reedy Quasar
Timing : 6 mm
Gear Ratio : 81/20
Batteries : Sanyo 3000
Traction Additive : Paragon FX2

Comments :
Servo mounted Horizontally
Some modifications : chassis, upperdeck, belt tensioner and shims to reduce slops
Last edited by daniz24; 01-21-2002 at 04:11 AM.
daniz24 is offline  
Reply