R/C Tech Forums - View Single Post - Idle help
Thread: Idle help
View Single Post
Old 06-21-2009 | 04:37 PM
  #4  
dreaux
Tech Elite
iTrader: (5)
 
Joined: Mar 2009
Posts: 3,660
Default

yes you can lean it with it off. Sounds like you are too rich or not getting enough air. check your idle gap and make sure it's open to .5mm if it is lean it out

turn your lsn a quater turn clockwise. but if it is flush with the carb housing or near that it should be fine.

some other guys might want to chime in but i would lean the hsn first.
dreaux is offline