R/C Tech Forums - View Single Post - Z-Car ZMXT-8 Z-Truggy
View Single Post
Old 06-18-2009, 06:03 PM
  #52  
fast11970
Tech Master
iTrader: (1)
 
fast11970's Avatar
 
Join Date: Nov 2006
Location: Freeport Texas
Posts: 1,007
Trader Rating: 1 (100%+)
Default

Yeah, Chech that screw adjustment,when these brakes are adjusted right, you can go into a corner really hard, they are great, somthin is out o wack, in the Manual there is a little detail about the adjustment, you might want to look at the brake section and make sure it is installed right, these really are great brakes, so I must agree with mad, somthin is off somewhere. Make sure you look at the linkage adjustment, the big black plastic thing that joins the front/rear is the bias adjustment, I also run a little less fuel tube for the front link, I adjust for rear bias, but if I jam on the brakes the front really brakes hard, due to the lack of "dampening" but thats how I like em...
fast11970 is offline