R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 06-13-2009 | 04:14 PM
  #7171  
bigmatt's Avatar
bigmatt
Tech Master
iTrader: (16)
 
Joined: Mar 2008
Posts: 1,485
Default

Originally Posted by grizz1
Sounds like the boys have it covered
Does sound like an idle gap / too rich problem. Either the idle gap is too small and the motor is simply stalling, or it's too rich on the bottom and it's loading up after a full throttle burst and choking itself. If it's too lean on top it would normally die as you accelerate away, say around half throttle. Just crank the idle up a little and see what happens. Maybe try a hotter plug too.
thanks grizz. I swear if I can get all this info into a manual I will post so every body can print it out. a lot of info passes this thread, like I said earlier if some thing strange happens to any of the go engines after it has been running properly. chances are it is something simple,not mind blowing disastrous.
bigmatt is offline