R/C Tech Forums - View Single Post - problem with new car
Thread: problem with new car
View Single Post
Old 06-11-2009 | 08:02 PM
  #3  
Z00M's Avatar
Z00M
Tech Master
iTrader: (15)
 
Joined: Jun 2004
Posts: 1,173
From: Perth, Western Australia
Default
Check also that the flywheel nut is tight and that you have the right collet for the engine. If the crank can spin independantly of the flywheel, it will wind the nut on tighter.
Z00M is offline  
Reply