Originally Posted by
MAD916
From What I remember this is the setup Dave and I ran at Reedy:
Front
5.5m ride height
35wt oil
19lb spring
shock mounted on second hole from top
.05 toe out
2 degree camber
short camber links with small .5mm spacers
2mm droop
Rear
5.5mm ride height
35wt oil
12.5 lbsprings
shock mounted in middle hole
2.5 degree toe in
2 degree camber
short camber link with 2 m spacer under ball
2.5m droop
that is what I can remember this earlier in the AM....
Hi,
Short Camber link would mean furthest mounting position on the bulk head?
Thanks for the setup.
Cheers