Originally Posted by
pl_unc86
So is there any easy way to keep the linkage from hitting the tank? Seems like everytime i get it right, it will hit the tank and then i have to back it off some (loose brake) to get it to stop.
The key is the angle of the rods off the servo horn. If this is correct the rods pass through sort of a window just bast the back of the tank. You could cut them down to minimal length but you may run into throw difficulties if you change to an engine that has a narrower carburator. For instance, OS's are really wide, Sirio/Star/Werks are really narrow. Changing between them caused me to have to re-adjust my throttle linkage a fair amount to accomodte the difference.