R/C Tech Forums - View Single Post - Houstons Engine Service H.E.S.
Thread: Houstons Engine Service H.E.S.
View Single Post
Old 06-04-2009 | 06:45 PM
  #760  
air8's Avatar
air8
Tech Champion
iTrader: (7)
 
Joined: Apr 2007
Posts: 5,748
From: Hutch, KS
Default
Oh sorry.

Novarossi Plus 21-5K--obviously. But with two thousandths added shim height. Thirty-three is what it mic'd at.
Dynamite Platinum #4(Med.) plugs
Dynamite 053MR pipe and header
Losi 13T clutch bell--slightly worn
Losi 50T spur gear--not lightened
Losi aluminum flywheel
(4)Losi Green .036" 30deg clutch springs
(4)M2C Regular (Hard) shoes http://www.amainhobbies.com/product_...%29-%28Hard%29

Losi 8-T 1.0 which gets regular maintenance after each big race and has been cared for. I keep the wheel and diff bearings packed with white lythium grease. I don't have the stuff in front of me. The truck is all stock setup with a one or two camber adjustments. That's it.
Last edited by air8; 06-04-2009 at 07:41 PM. Reason: Added two thousandths shim height
air8 is offline  
Reply