R/C Tech Forums - View Single Post - E Revo Brushless Conversion
View Single Post
Old 06-02-2009 | 01:27 PM
  #2  
8IGHTROCKETX3's Avatar
8IGHTROCKETX3
Tech Addict
iTrader: (63)
 
Joined: May 2009
Posts: 723
From: Manassas Va.
Default

Originally Posted by neillarson
I did the brushless conversion on my E revo, used the Mamba Combo with the 2200Kv motor with an 18T pinion and the stock spur, 64?. The truck is quick, but not even close to what I expected. No wheels stands, tho it has pulled the rubber off the rims a few times, so I know it is faster than stock. All I see are the insane speeds everyone braggs about on these posts.

I am using new 7 cell NiMh, 4600mhr batteries until I can convince myself to invest in LiPo. But, they should be faster than the LiPo anyway, based on voltage, at least for the first part of the run.

I have not seen or felt any issues with a hot motor, ESC or gear train.

Any Ideas? I may have to break down and take it to the LHS and have someone under the age of 25 look at it :-)
your batteries are the issue. i've never seen any NIMH battery come remotely close to having the punch a lipo does even with the same voltage. i started out with nimhs too, and i had some of the best packs available next to sponsored drivers and there's no comparison at all. they just aren't in the same league.

Last edited by 8IGHTROCKETX3; 06-02-2009 at 01:39 PM.
8IGHTROCKETX3 is offline