Originally Posted by
home13oy75
I'm currently running the RS PRo 17.5 on a medium sized outdoor parking lot track. My FDR is at 4.0, timing on motor = 0, and 30 of boost. I'm also running the 198 software. My temp on the motor was 195 F. I was wondering if I can get some advice on if I should lower the boost to say 20 or gear up 2 teeth on the pinion. THe top end seems decent, maybe a little sluggish on the bottom.
THanks in advance.
You better gear down 2 or more teeth,That with give you your grunt out of the corners back and get the motor temp down. With 30d boost I'll bet your top speed won't suffer any