R/C Tech Forums - View Single Post - 8T 2.0
Thread: 8T 2.0
View Single Post
Old 05-29-2009 | 10:20 PM
  #2767  
Frank L's Avatar
Frank L
Tech Lord
iTrader: (148)
 
Joined: Dec 2008
Posts: 12,520
From: NorCal
Default

Fix the issues and then run the $@it out of it. After these few bugs are worked out the truck is awesome well worth the frustration. I felt the same was when I put it on the track and then 2 laps the rear shock ends stripped out. Back to the pit and a quick fix 5 more laps and then one of the inner rear camber bolts backed out. back to the pit a few more laps and then the steering servo horn stripped out. It took awhile to get through a full tank of fuel without any issues. The rear bearings are a big issue. So bad that the King Headz alum rear hub uses a bigger bearing. I fought the rear outer bearings for a month before I upgraded to J-Dub modded hubs. The rear bearings would not last a 30 min main. Now with the larger bearing its no problem. I am telling you though once the bugs are worked out the truck will reward you. It is worth it.
Frank L is offline