Originally Posted by
viper1
Hey guys,
I'm running the e4rs 09 edition.I do have a question about the amount of play/slop in the axles.this area seems to be the biggest let down of an otherwise fantastic car.
How do u guys solve this problem?
Thanks and regards
Remove the uprights from the car.
Clean the parts with non residue spray ... electric motor cleaner.
Take a Q-tip and some medium super glue and make a thin layer around the plastic there the outer race of the bearing rests. Let it dry and try to fit the bearing ... if it's still lose... add another layer . Make sure you let the glue dry completely before attempting to fit the parts together.
Shimming the bearings on the axle will not remove the slop in these parts , only puts undue stress laterally on the bearings but will make them move together. Not solving the problem just causing others. Good luck with that one.
