Originally Posted by
mfrosty
Keep leaning the top an hour at a time until you can keep it running getting into the upper % of the throttle. Sometimes factory setting are WAY too rich. Like my +4 I'm breaking in now. I've went 1/4 turn on both the bottom and top to keep the temps around 200, and that's with the head wrapped in foil!
Frosty, I probably went the equivalent of a 1/4 turn at 1 hr increments yesterday and got the same results. Then I thought maybe the settings were off from factory so I started over at 2.5 turns out from bottom. I tried that, only leaning the bottom, with no results. Figured I should ask before ruining something. I was trying to get temps up, even with foil only got to 112, presumably b/c I couldnt get it moving.