Originally Posted by
RcRacing4Ever
Hello...the manuel I have must be joking with me...just got the truck...Im at the build point on the rear camber links...my manuel says 2.80". Is that correct? Cause mine wont even reach the rear hub. I was reading some pages & it didnt seem like u all had ant problems Thanks in advance
You are gonna want your rear camberlink as long as it can go, I mean just put the ballstud on the far outside on the rear hubs and inside nearest the shock tower.
Then snap the camberlink on and adjust it to around 1 or 2 degrees negative camber, don't worry about what the manual says cuz you will need the longest camberlink position as well as ALL the other mods to add rear traction.
Best to read thru this thread thoroughly!