Originally Posted by
cheech4
someone was mentioning the EXT axle was giving problems. there is a fix to this. you can use the nitro evader CVD's on the EXT but the side of the out drive might need to be grinded down a bit, for those who are good at this can make it happen. Now for those who are not handy with a grinder, you can use the nitro evader axles and the associated T4 dogbones, this will work.
Hey guys!
RC nOOb here...
I just inherited a brand new in the box DuraTrax Evader EXB EP RTR.
Will the above rear axle mod work on the EXB like it does on the EXT???
My evader also came with the following:
Two additional sets of new stock wheels/tires
Duratrax Bearing Set Evader EXT (14) DTXC1096
Cow Performance Cleaner, Lube and Duster
Team Associated Diff Lube and Black Grease
Duratrax NiMH 7.2V 2000 Stk Pirahna DTXC1900
Duratrax NiMH 1500mAh Batt/AC Charger EXT DTXP4610
DuraTrax X-Large Field Bag
I guess it's not a bad starter kit for FREE
I'm gonna have to replace the bushings with those bearings.
My guess is that I should do the axle mod then to???
What else will I need to swap from bushings to bearings?
From reading quite a bit of this thread... The plans for this buggy will be to bash it, burn up the stock motor, tires and look to upgrade to a better motor, battery, etc.
Then maybe race it
Any suggestions?
Thanx,
RubiconNY