R/C Tech Forums - View Single Post - CRC GenX 1/12th roller plus extras
View Single Post
Old 05-05-2009, 03:01 PM
  #1  
Trips
Tech Elite
iTrader: (16)
 
Trips's Avatar
 
Join Date: Aug 2001
Location: 360 Speedway
Posts: 2,251
Trader Rating: 16 (100%+)
Default CRC GenX 1/12th roller plus extras

Up for sale is my GenX 1/12th car. This car has 4 carpet race days on it. The fastest, most consistent 1/12th car I've had in several years. Our track is gone, this car deserves to race, not sit on a shelf.

You will get the complete rolling chassis, I will leave the steering servo in place, it is a JR 3400G, which is the same as the JR3650. It's a high speed,digital, metal geared servo. The car comes with spare parts, you'll get a set of front arms (upper and lower) as well as the #3345 long ball conversion set (the 3277 graphit crossbrace is already on the car, as you can see in the pictures) also, a spare set of #3235 front axles, and a set of #3390 .45mm front springs.

THe car is built with the wide brush;less pod as it comes, but I'm also includinig all the graphite parts and standard right rear hub to convert back to the brushed pod if that's the way you want to run it.

Also, I have an SMC 4000mah single cell LiPO for the car. I will sell the car with or without the LiPO, your choice.

PRICE REDUCED $130 for everything, or $100 without the LiPO. $70 for the bare roller without the servo.

Paypal only, no trades at this time.

Thanks for looking.
D
Attached Thumbnails Click image for larger version

Name:	DSC00329.JPG
Views:	83
Size:	144.1 KB
ID:	449557   Click image for larger version

Name:	DSC00330.JPG
Views:	57
Size:	139.1 KB
ID:	449558   Click image for larger version

Name:	DSC00331.JPG
Views:	41
Size:	128.4 KB
ID:	449559  

Last edited by Trips; 05-06-2009 at 07:58 PM. Reason: price reduction
Trips is offline