Jaz406

iTrader: (50)

So your rdx has the standard length front shocks and tower? if so then

Front

17lb front with 40 wt. I ran 3 hole Tamiya pistons but a large two hole corally will work too.

middle or outside upper shock mount. outer lower shock mount.
second to the shortest upper inner camber link.
Medium front roll centers
4* caster blocks
.5* toe out
-1 degree camber

Rear

14lb spring with 25 wt oil. tamiya 3 hole or Corally large two hole.
outer upper and lower shock mounts.
Medium length camber link. upper row second from outside both inner and outer locations.

Medium high rear roll center. 2* rear toe total.
-2 degree camber

That's about all i can remember, lol