View Single Post
Old 05-01-2009, 10:04 AM
Tech Adept
iTrader: (13)
Bob~H's Avatar
Join Date: Feb 2009
Location: Sullivan, IN
Posts: 136
Trader Rating: 13 (100%+)

Originally Posted by Randy_Pike View Post
Bob, that's only 21 degrees of timing between the motor and boost. I'd suggest bumping up to 12 on the motor and 18-20 on the boost. You're going to drop some pinions to use this setup but give it a shot.

Whos' beating you and with what?
Thanks Randy. I was running 9 degrees on the 194 software since I had read on here that the timing boost below 10 was doubled. I had assumed 9 on 194 was like 18 on the speedo with 12 on motor for a total of 30, my bad. I will try your suggestion and drop pinions. The only setup I know is a local racer running an Orion 17.5 with I believe an LRP ESC. I have been running a 76 spur with 52 pinion, I would guess with the 18-20 on the speedo I would start around a 76/47?
Bob~H is offline  
Reply With Quote