Originally posted by Buda
My servo saver came loose durring my last race so I had to adjust it. I didnt have the manual so I tightened it then backed it off 1/2 to 3/4 of a turn later I toasted that servo what is the best way to adjust it?
On all my TC3's I have done the same adjustment I tighten the screw (1/16" driver) thru the small hole in the chassis until the thread of the nut has completely filled with screw.
On the file that's attached with this post you can see what's my adjustment for the servo saver. I use a Futaba 9450 servo and I needed to adjust on the tight side.