Originally Posted by
njmose1
I have an evader st pro that i've had for a few years now. finally got it out again and been runnin it. it's all stock. it has the 15T motor on it but want to go brushless and a bit faster with it. I'm looking for some good suggestions on what needs to be done to make it brushless and faster.
IF you race a 13.5 or 10.5 works well AND whatever brand your LHS has.
Some offer easy/quick plug-in instead of soldering wires to the motor.
Lipo battery, 5000 (7.4 volt) is the standard Again whatever your LHS has.
Some are hard wired, some have plug-in wires.
Lipo charger, IF it doesn't have a built-in balancer you don't want it!
===
Here is what I have in my T4
Speed Passion 13.5
Core_RC 3250 lipo
Core_RC UDC-20 charger
A side note about why I use the about.
Schumacher race cars office is just a few blocks from the track I race at, SO IF I have a problem with the above I can get my warranty stuff done at the track! Some of the R and D guys race their every Fri night. The one on one with the "factory" boys helps with tips and warranties!!!!