R/C Tech Forums - View Single Post - RB Concept Engine Thread..
Thread: RB Concept Engine Thread..
View Single Post
Old 04-24-2009 | 11:01 AM
  #300  
losi8lunie
Tech Adept
 
Joined: May 2007
Posts: 150
From: Birmingham UK
Default
Idle air gap 0.8mm
High jet. 3.5 turns out from closed
Low jet 5 turns out from closed (make sure you set this by holding the slide full open otherwise you will damage the spray bar)
losi8lunie is offline  
Reply