R/C Tech Forums - View Single Post - Telemetry kits (handheld)
Thread: Telemetry kits (handheld)
View Single Post
Old 04-24-2009 | 07:51 AM
  #7  
RCGaryK's Avatar
RCGaryK
Tech Champion
iTrader: (3)
 
Joined: Sep 2003
Posts: 7,331
From: Champaign, IL
Default
Originally Posted by micknshery
so the sr3100rx is compatible?, I removed the bind plug as per the manual, and did the bind on the handheld, but with the on board unit plugged in to the bind port of the rx sends the rx back into bind mode everytime switched on...
Plugged in the sr3300t worked first go, and after redaing a prior post you state the sr3000 sr3001 and the sr3300t are the only compat rx's with on board telem...would really like to be running the sr3100 dsm2 but doesn't seem to wanna work?
Ok, wait a sec...

The ONLY receivers compatible with telemetry are:
SR3000
SR3001
SR3300T

If you're trying to use the SR3100, that's the problem right there.

Also you don't use the SPM1325 with the SR3300T, it's built into it.
RCGaryK is offline  
Reply