R/C Tech Forums - View Single Post - Novarossi 321 help help help !
View Single Post
Old 04-22-2009 | 05:20 PM
  #9  
BigC2007's Avatar
BigC2007
Tech Master
iTrader: (9)
 
Joined: Sep 2007
Posts: 1,881
Default

Originally Posted by Scottyoo
Hey there big C, it sounds like you had a exhaust side sieze. Very common in hot weather and maybe abit on the lean side. I would bet money it has skid marks on the ex side of the piston and on the sleeve aswell. This tends to pull the chrome off the sleeve abit but Ive had engines run ok after this type of seize in the past. Just be sure to check the rod for play by taking out the plug, turn engine over till you feel it pinch a little. Then see how much the fyl wheel wiggles when rocked back and forth very gently. Should be ok but ya never know. If you run it again and it kills a couple of plugs for no reason, you have a rod about to break so be on the pro active side of things and check often..
Scottyoo thanks bro for that info I will check the rod out this weekend that was some great info.
BigC2007 is offline