Originally Posted by
Duster_360
For the 1st several runs with it, make sure the lipo is not getting hot, it shouldn't be getting hot anyway, but you def don't want it getting hot when its new. Also go easy with it - use 3000 or 4000mah of its capacity and stop for a re-charge. Thats the other thing thats proving to be hard on a lipo, running them all the way down to a voltage cutoff, especially if its 6v, if you hav ethe optin with your setup, try 6.4v as a cutoff.
Thats a great pac, little care with it now will pay back later.
Think you'll find you need a diff balance tap adapter for your lipo. Venom Pro comes with JST or Align type balance connection. You'll need one for PolyQuest.
and my novak has a 6.4v cut off so it should be ok.
here is a pic
as for the balancing connector box .. the plug it fits into the 4 cell plug slot on the balance box that comes with the venom does that make a difference or am i gonna have to get a diff plug so it fits into the 2cell slot ... ugh i feel bad asking these questions
