R/C Tech Forums - View Single Post - Hot Bodies Cyclone
View Single Post
Old 04-16-2009, 03:10 PM
  #15913  
Scott B
Tech Master
iTrader: (47)
 
Scott B's Avatar
 
Join Date: Dec 2002
Location: NOR-CAL
Posts: 1,348
Trader Rating: 47 (100%+)
Default

Originally Posted by EJ20
Hi Scott B, see if you know how far the difference is between tc-spec w/ Duo and stock spec w/ Duo? Thanks
I ran 4.5 with the Duo and TC, I have not run my SPX in my sedan yet as it's currently in my WGT. But most have gone up to 5.1-5.2 when running the higher profiles on the SPX.



Originally Posted by Riketsu
Did you go to 4.5 with the 16T or with the 18T???? So, I can go down to 5.8 with 16T and be safe?
I use the 18t pulleys on my car. But you can still run the 16t pulleys and be fine, you will just have to run smaller spurs to get the same overall ratio's. I was running a 102/47 last time I think. With the 16t pulleys to get down to a 4.5 you would have to run a 88t or 90t spur. Ya a 5.8 ratio should be fine.
Scott B is offline