Originally posted by wolfeman09
All > How do you maintain and clean your one-way. I have run it a couple of times and just wondering what you all do to keep it running smoothly. [/B]
I'm not All, but...
I clean after using removing the ring gear and the outdrives and spraying with motor cleand on the innards of the bearing, let to complete dry and put Serpent's one-way lube (the ones that is of red color).
After, I assemble and check for any roughness on the bearings, if all is ok I store for the next time I need it, if not, I repeat all the process (one time I needed to clean with a mix of denaturated alcohol and acetone at 70 alcohol /30% acetone. Beware with the bearings and the acetone.