Originally Posted by
ifuonlyknew
Here you go, Fine Design did.
DANG IT!!! That's exactly what I had envisioned. Two aluminum tubing coils one around motor and one acting as radiator. Fuel tubing connecting the system to act as a vibration elimination. Not to mention no solid fittings to come loose. The fuel tube and aluminum could be clamped together. The TCS liquic cooling solution would be easy to duplicate. Eliminating the risk of ruining electrical components by using a non-conductive solution. I was looking at a mini pump similar to TCS's which draws about a 1/2 watt (almost nothing). The whole system should be less than 2 ounces (not including the fan). Too bad it's been done already. I still may do it just for the fun of the project
We shall see I guess.