R/C Tech Forums - View Single Post - 8 2.0 rear bearing
View Single Post
Old 04-10-2009, 02:48 PM
  #6  
bastard dsm
Tech Adept
 
Join Date: Mar 2009
Location: garland, tx
Posts: 104
Default

well the only thing i had a prob with was the back left out drive was torn up and the dog bone pin was still like new after its first gallon. i checked the shim spacing and it was 2mm on the left and 4mm on the right. so now its
3mm on each side and i hope this fixes this problem.
bastard dsm is offline