Originally Posted by
Wes Briscoe
It says in the instructions that came with the truck for the Pro28. If I recall it was something like 2 1/2 or 3....just guessing but turning it out 4 should be rich enough that you can lean it down until it runs right.
For those of you that are having issue with the remote glow plug wire; if you want to keep this system (I like it myself) you can buy a locking glow plug adapter, several companies sell them. I bought one made by dynamite, it screw locks on the glow plug like some ignitors do and it pretty much solves the problem of the wire popping off.
It won't work with especially tall plugs like the ODO99 and ODO100 however.
my problem with the remote plug, it is were the ground wire and the remote plug bolt together. everything stays tight but it still looses ground partially
i put a new plug in the glow starter glows bright, hook one up to the remote
and ground the plug, barly glows. tried 3 glow srartes all the same
if i take it apart. put it back together its ok for about 1 tank.