Originally Posted by
JamesArluck
Lowering the pivot points for the t-bar that much would change the roll center a lot. I agree with Crash, just wait for the saddle lipos, they are coming...
I gave OD one of these...
http://www.maxamps.com/Lipo-2200-111-Saddle.htm
And he took it apart and made two 3.7 saddle packs out of it!!! The only problem is that they are still just a little too long and pushes the speed control and receiver a little too far forward but nowhere near as bad as a SMC single cell lipo jammed on to one side of the car. We need a pack that is 34mm X 34mm. Oh, and the two packs came out at only 8mm tall. Very low.