R/C Tech Forums - View Single Post - 3PK digital-analog servos
Thread: 3PK digital-analog servos
View Single Post
Old 04-06-2009 | 10:38 AM
  #5  
JayL's Avatar
JayL
R/C Tech Elite Member
 
Joined: Mar 2006
Posts: 3,111
From: Ca
Default
you can run a mix (digital/analog) no problems, IF you use ONLY PPM or PCM mode.

If you ever run analog on HRS you can ruin the servo, I've seen it...
JayL is offline  
Reply