Originally Posted by
Dragonfueled
so are you guys gonna use diff fluid in the diff or just grease ? It is sealed rite?
I will be using Grease for now.
The output shafts are double sealed with O-Rings.
One small one (external) which is held in place by a groove and seals between the bearing inner race/shaft, and one standard size (internal) between bearing and washer/roll pin which holds the output shaft in place.
There is a paper type gasket when you close up the gear assembly. I put a thin coat of Mobil 1 Grease on each side to help seal once the assembly is screwed together.