R/C Tech Forums - View Single Post - SC10 Thread
Thread: SC10 Thread
View Single Post
Old 04-02-2009, 12:23 AM
  #47  
JDCrow
Tech Fanatic
iTrader: (32)
 
Join Date: Jul 2007
Location: Arlington, TX
Posts: 956
Trader Rating: 32 (100%+)
Default

Wrapped up the final steps and have the truck in roller mode. I had a set of FT Threaded Shocks already prepared for the truck. I changed the front springs to the Gold, and haven't built the Kit Blue Shock Sets. I am sure they will work just fine. I just prefer the FT Threaded shock bodys.

One piece of advice as you install the electronics. If your servo has short leads or even if it doesn't, dont assume it can reach your normal receiver mounting location. The extra length of the chassis could make the lead a little short. Pre fit the receiver with the Servo Lead plugged in before you make the final attachment.

Also if your using the KO 2413 Servo. It does fit (width) but it is a little tight. Ive been using this servo in my T4 for some time like this.

I did test fit a Traxxas Body on the SC10 Chassis just to confirm homologation. By relocating the mounting locations on the Traxxas body, the body does fit the SC10. Although the work AE did on theirs makes a great looking truck.

For Slash owners, The AE body will even look good on your truck. You will just need to trim some material away to clear the Front and Rear Bumpers on the Traxxas Chassis.

#9836 SC10 Clear Body
#9838 SC10 KMC Body Prepainted & Detailed
#9839 SC10 Lucas Oil Body Prepainted & Detailed
#9840 SC10 Bully Dog Body Prepainted & Detailed
#9841 SC10 ProComp Body Prepainted & Detailed
#9842 SC10 AE Body Prepainted & Detailed
#9843 SC10 KMC Decal Sheet
#9844 SC10 Lucas Oil Decal Sheet
#9845 SC10 Bully Dog Decal Sheet
#9846 SC10 Pro Comp Decal Sheet
#9847 SC10 AE Decal Sheet

This was a Fun Truck to build. Every part was packaged, labeled, and undamaged. Something you dont always have when you get a first run of production.

If you have a spare set of FT Threaded Shocks, go ahead an build them up while you wait on your truck to arrive. You will be a litttle ahead once you get your truck.

Now to get some rest.
Attached Thumbnails Click image for larger version

Name:	Rolling.jpg
Views:	1991
Size:	73.1 KB
ID:	436275   Click image for larger version

Name:	rolling2.jpg
Views:	1558
Size:	83.2 KB
ID:	436276   Click image for larger version

Name:	rolling3.jpg
Views:	1504
Size:	73.7 KB
ID:	436277  

Last edited by JDCrow; 04-02-2009 at 01:00 AM.
JDCrow is offline