I went all out removed the bolt and took 1mm from the mount (can always put a shim back in) and removed 1mm from under the motor bulkhead , also removed the cylindrical bulkhead brace and cut the top brace (phew) and trimmed the underside of the bulkhead to fit LiPo's in.........first run the car didnt have that twitchy feeling anymore so i could dial out the expo from the steering and actually am running 1deg toe out on the front (on rails).


oh yeah the rollbars are 415

If you look on YouTube our track is R/C racing at LittleHampton although i think its the 1/5 scalers

Cya Mark