Originally Posted by
JayL
to droop the tamiya we use the David Jun method:
set car with chassis on setup board, no blocks, no tires, nothing.
measure the distance between the setup board and the top of each axle using the depth measuring part of your calipers
I usually end up with about 26mm in the rear
Yeah thats right , fine tune for your track though 26mm for a tight track
and 25mm for sweeping longer track
3 hole pistons and 50wt front 3 hole and 35wt rear
try white fronts and blue rears and tyre tweak rears only
also keep your ride height neutral say 5mm front rear.
H T helps