Originally Posted by
Integra
13mm shim's for the axle ? you need a 8mm shim for the axle hex's.
these are what you need for shimming the hex's.....i would recommend leaving a tick of play in them tho....as if you take up all the slop you will junk out bearings even faster.
http://www.amainhobbies.com/product_...oducts_id/4067
Whats Up Integra? I said 13mm for the axel. Of coarse you wouldn't shim it tight. 1 shim is all you need. I've helped several with this and they all have loved it. You are thinking of the other end. Shims on that end get trashed from the pin. If you do it from the other end they will never get trashed.