Originally Posted by
rx7ttlm
13.5 pulse from express, also maybe a 13.5 duo (goin to compare the two), and either sphere tc at first then switch to my KO BMC-1( i have both). I don't have the programming adapter for the BMC yet so thats part of why I am holding off on that one.
thanks
If you are using an LRP ESC, I would start out with an FDR of 4.5 to 4.8, and leave the ESC in the normal profile. I am pretty sure the LRP aggressive profiles use boost timing. Either way, set up the car and run it, and gear for temps and speed. If you use an aggressive boost mode on the ESC, increase the FDR, and try to keep the temps around 180 after a 6 minute run.