Originally Posted by
jelayne
Guys i am currently facing a problem with my transmission every time it goes into second gear it jams and the 2 speed adapter (335570) is stuck in an open position. Any idea why this is happening, my hex screws are set to stock settings and it still happens...
I have also noticed the shoes have alot of play when placed inside of the 2nd Gear carrier..
Any ideas?
at a guess id say your missing the screw cap set screws pins 983404 page 16 and your centre hub 335570 has spun inside the housing and jamed up.
put the pins in and adjust the shoe for minimal clearince in your 2 speed carrier 335520 i do mine up till it gets tight then back screw off 1/4 turn one side at a time.. they fine tune on the track