front ride height shim question
CarbonJoe, CarlosG and InspGadgt, thanks for the tips.
i was only focusing on the fine tuning aspect, which the CRC and fiberlyte parts solve nicely. but the BMI part suggestion adds another factor. it makes sense that a solid 'spacer' reduces wear and tear on the arm.
Sounds like a 3.0 and 4.5 solid spacers with a thin shim set (CRC or fiberlyte) would be a less expensive compromise. thanks again.
Last edited by avs; 03-14-2009 at 09:21 AM.
Reason: typo