Originally Posted by gnccracer

I have one of the original EB Mod engines that was pre broke in before I received it. It is not the full mod engine. I've ran about 2 gallons through the engine and have had great luck so far. This past weekend the motor started giving me problems. Through the first 2 minutes of a run everything is fine. After the engine heats up I have no bottom end power. I was all over place with my tune searching for the problem and nothing seems to help. I changed the glow plug and set the motor back to stock settings. I retuned from there with still no luck. I changed the fuel tank and put new gaskets on my pipe. I also checked all my fuel lines but the problem is still there. Any help would greatly be appreciated.