R/C Tech Forums - View Single Post - Go-Tech Engines Thread
View Single Post
Old 03-11-2009 | 12:41 PM
  #5924  
grizz1's Avatar
grizz1
Tech Elite
 
Joined: Nov 2007
Posts: 2,983
From: Auckland, New Zealand
Default

Originally Posted by racer6888
no, im still running 1.0 springs in my clutch. i think i did change to a different type of alum shoe though.
anytime i try WOT on the box, or on the track it dies.
idk what is causing it.
Only other thing that springs to mind is a blockage in the HSN needle / jet area.
I had a little bit of needle "O" ring shred off and block the HSN jet a while ago. Chased the tune for a couple of days until I realised there was something else going on. It would run fine for 1 or 2 min then start lean bogging and cutting out under acceleration. Start it again and it would be fine for a while then go crazy again. Maybe pull both HSN and LSN needles out and blow out the jets etc. Other than that I don't know what it could be, seeing as you have sealed everthing up already.
grizz1 is offline