Tamiya ORC AMEMIYA SGC-7 (TB-03 CHASSIS)
~New Arrival~
1 / 10 Electric RC Car Series No.425
ORC AMEMIYA SGC-7 (TB-03 CHASSIS)
Item No: 58425
Translation from Tamiya
[The challenge of the isolated] now RC race car - square off Super GT’s GT500 class works. Meanwhile, more than 20 machines crush the GT300 is a battleground state in the privateer class. Among a variety of machines, the only rotary engine as the car fought the 2008 season, ORC Amemiya SGC-7 electric RC car assembly kit. Mazda RX-7 to reproduce the full realization in the form of polycarbonate finish the race car base. Chassis in which the Board FURONTOSASU, upright motor shaft drive 4WD of the TB-03. The sharp run-bodied and is a real RC cars make the race.
[SUETA a race against four wheel drive shaft, TB-03 chassis] adopted motor shaft drive chassis is a standard upright Parts 4WD Race for the basic TB-03. BASUTABUFUREMU high dust and mold with a low center of gravity to MOTAKURINGUDAKUTO. The propeller shaft of the split type and high efficiency, with around a ball differential. Seek further efficiency and drive, also achieved a good improvement. INBODOTAIPU the front suspension and four-wheel DABURUUISSHUBON. Furthermore, SHOTORIBASHIBURUSASUAMU, TRF416 PYUARESA use around the upright. HAIPOTENSHARUSHASHI is incorporating expertise from throughout the combat.
Basic Specifications
Overall length: 459mm
Width 191mm, height 110m
body weight 1077g
Wheelbase: 257mm
Tread with around 165mm
Motor = RS540 type
Drive system = vertical position motor drive shaft 4WD
system DEFUGIYA F / R both
ball differential
SUTEARINGUTAIRODDO = 3-part Suspension
F / R co = DABURUUISSHUBON
Damper = F / R CVA co OIRUDANPASUPAMINI
GIYARESHIO = 7.09: 1
tires = F / R both width / diameter 24mm / 64mm
speed controller = ESC specification
Where to buy ?
http://www.rcmart.com/catalog/rc-tam...cPath=420_1167
MORE INFORMATION ABOUT TB-03 PLEASE CLICK
http://www.tamiya.com/japan/products...m#tb03_chassis
Source : Tamiya