R/C Tech Forums - View Single Post - Looking for 1/10 Electric Racers on the New Asphalt at Mikes, Houston
Old 03-06-2009, 07:59 PM
  #15  
John Stranahan
Tech Elite
iTrader: (27)
 
Join Date: Aug 2002
Location: Houston, Texas
Posts: 3,780
Trader Rating: 27 (100%+)
Default

Here is my World GT entry ready for some track action. This is a CRC Gen X 10 to which I have added RC18T side shocks to replace the side dampeners. The wide body mount side plates are installed. All else is stock CRC.

Novak Havok, (any speed control accepted)
Novak 10.5, (The spec motor)
Orion LiPo 3800 graphite edition, (The spec battery), lower capacity Orions accepted
AMB personal transponder (recommended)
Spektrum receiver (or Futaba Fasst) recommended.
Rear CRC World GT spec tires (a spec rear tire, also Jayco Lilac and BSR Lilac) You will need purple fronts of any brand. A few BSR are in the shop.
48 pitch 72 spur, 23 pinion to start out. 48 pitch is recommended, not required, on this outdoor track.

Plus you are welcome to run your brushed 19 turn and 6 cell NiMH until you use up your personal stock. You can also run your touring car as well for a separate place. If we get 6 touring cars then we can have a separate heat. I have a touring car ready as well.

john
Attached Thumbnails Click image for larger version

Name:	World GT Electronics Install.jpg
Views:	1902
Size:	139.4 KB
ID:	426394   Click image for larger version

Name:	Protoform Alfa Romeo Front Decal 001.jpg
Views:	783
Size:	186.5 KB
ID:	426958  

Last edited by John Stranahan; 03-08-2009 at 05:15 PM. Reason: touring cars for a separate place, open mod.
John Stranahan is offline