Originally Posted by
coaltrain
I'm about to order a .28 3 port and I have a question about my starter box. The one listed below is what I already have, I used it on my XXX-nt, will it have enough power to start the GO or will I need to buy a new box too?
http://www.amainhobbies.com/product_...ducts_id/17056
I used to start an 1/8 scale on that same starter box, I could only have pins in the front though so I had to manually align it. The power will be plenty to start the GO, but when the engine is brand new I'd definitely pre-heat the engine. You'll definitely want a new box if you're racing though because you need to be able to align the car quickly.