....I use the 007 EU with the following on carpet....
FRNT:
.5 toe out
4degree caster
forward akerman at post
outside hole on steering block
3rd hole out upper shock mnt hole
40wt oil 3hole and 2 hole really preference
1.5mm wheel hexes to equal tire width frnt and rear
lower inside camber link position
frnt top deck posts removed
white frnt springs
outside lower shock mnt at arm
1 degree of camber
1.2 sway on (EU edition)
REAR:
1degree rear uprights
shocks layed down
30 wt oil
3 hole pistons
outside hole at arm
1.3 sway on (EU edition)
1.5 to 2 degrees camber
yellow springs
rear topdeck posts removed
I am gonna run this setup on my US kit this weekend without the sways may go with yellow all the way around...I run 21.5/lipo....
Hope this gives you guys a good start....