Originally Posted by
NiTrO BoOsTeR
wouldnt that reck the enging its the around the crank pin (not on the crank pin but on that part of the engine
(See pick below)
The red is not the rust i thought i would add some detail
you will have to take the crank out to do this, get a bit of fuel tube, cut it a little longer then the crank pin, fit it on the crank pin, if you slip it wont effect the pin in any way. use a small wire wheel of the dremmel, it wont take much to get it off. dont use polish, unless your willing to scrub the crank real good. polish is a corse paste, which if its not removed properly it will mix up with the fuel , and become a grinding agent. it creates wear. the wire wheel is plenty good enough, but still was the crank good.