like wat they said is true as long it doesnt over heat its fine, but usually it does esp bashing becoz we run our cars too long. The temp of batt, motor & esc will go up esp also in asia country.
I am running a 100amp plane hobbywing esc on my crt put one 1 watt fan on it & its fine. but there are risk that why i told you to get higher amps.
fast or slow u can get a slower motor or smaller pinion
Originally Posted by
tkhoo
Hi dethklok151, that is ok....
Now I wanted to concentrate to get BL setup from Hobbywing to convert my crt.5. Ok, here is what my plan, get Hobbywing 60A esc, 4000kv(8.5T) motor and 3S Lipo. Esc and motor cooling fan will supply by 6v rx battery. So this is good setup? Can cause over heat on the electric?
Last time I plan for 80A because I plan to move this combo to my 1/8 scale buggy but have check 1/8 buggy need around 2000kv motor with min 4S Lipo so I decide not to convert my 1/8 buggy.