Hey all,

Just wondering if I could get some help with the problem Im having with my DX3S as its making my buggy undriveable.

Simply put, the problem is that the servos just move on their own

Im in the process of uploading a video to Youtube to demonstrate this as its definitely the best way to show you the problem.

Anyway, background info on whats running in this situation.

Hobao Hyper 9
Novarossi 21-5KT w/ 9886 pipe
Spektrum SR3300T Rx - no telemetry sensors attached, sticker still on
Spektrum DX3S Tx
2x ACE 1015 Servos
Intellect 1600mah hump pack

So what I have done thus far;

1. Replaced all possible connectors in the receiver compartment with deans plugs in case it was a power issue of the connections coming loose.

2. Moved receiver to the outside of the receiver compartment, as far away from engine as possible - to check if it was vibrations/overheating.

3. Tested another already broken-in engine that I could start and have running at low 40 degrees Celsius to check if overheating was the problem but it still occured even at low temperatures and according to my infrared thermometer the receiver compartment was low 40s.

4. Rebinded the Tx/Rx to each other.

Im completely lost as to what to try now.